Uttar Pradesh Public Service Commission has released multiple vacancies for the the post of Assistant Engineers for Civil Engineering, Mechanical Engineering, Electrical Engineering and Agriculture Engineering

Complete Advertisement - Download

UTTAR PRADESH PUBLIC SERVICE COMMISSION Advertisement No.

A-5/E-1/2019

Date 30.12.2019

Combined State Engineering Services (General Recruitment/Special Recruitment) Examination-2019

Date of Commencement of On-line Application : 30.12.2019 Last Date for Receipt of Examination Fee On-line

in the Bank : 27.01.2020

Last Date for On-line Submission of Application : 30.01.2020 Important

(i)  If at any stage it is found that the candidate has concealed or misrepresented any desired/required information, his candidature may be cancelled and other appropriate action like debarment may be initiated against him.

(ii) The candidates must send hard copy of their on-line applications and enclose self attested copies of all certificates in support of their claims rendered in the on- line application. In this Connection, a separate press communique shall be published in due course by the commission.

"SPECIAL NOTICE :- (a) On-Line Applications will be accepted only when prescribed fee is deposited in the Bank upto prescribed last date for fee deposit. If the fee is deposited in Bank after the last date prescribed for fee deposit, the on-line application of the candidate will not be accepted and the fee deposited in the Bank will not be refunded in any condition. It will be responsibility of the candidates to deposit fee in the Bank upto the last date prescribed for fee deposit and to 'submit' the application upto the last date prescribed for submission of applications. It is also informed that any amount deposited in the form of examination fee shall not be refunded in any condition.

(b) In Online Application System, the candidates have to provide their Mobile No. and valid e-mail ID in prescribed column failing which their Basic Registration shall not be completed. All relevant informations/instructions shall be sent through SMS on that mobile and e-mail on their valid e-mail ID.

NECESSARY INFORMATION TO APPLICANTS FOR FILLING THEIR APPLICATIONS THROUGH ON-LINE

This advertisement is also available on the Commission's website http://uppsc.up.nic.in. The online application system is applicable for applying against this advertisement. Applications sent by any other mode shall not be entertained hence candidates are advised to apply On-line only. In connection with On-line application, candidates are advised to go through the instructions thoroughly given as under and apply accordingly.

1. When the candidate clicks "ALL NOTIFICATIONS/ADVERTISEMENTS" on the Commission's website http://uppsc.up.nic.in the On-line advertisement shall be automatically displayed, wherein there shall be 3 parts as given below :

1. User instructions

2. View Advertisement

3. Apply

A list of all the advertisements will be displayed in which "On-line System" is applicable. The Instructions for filling "On-line form" have been given in User Instruction. The Candidates desirous to see the advertisement will have to click before 'View Advertisement' to which they are desirous to see, full advertisement will be displayed along with sample snapshots of ON-LINE Application Procedure. Click on "Apply" for On- line Application.

On-line application will be completed in three stages :

First Stage: On clicking "Apply", Candidate Registration will be displayed. Basic Registration form will be displayed on clicking the 'Candidate Registration' respective to Examination. After filling the Basic Registration form, the candidates must check all the informations filled by them. If any correction/modification is required, click on "Edit" button and ensure the required corrections/ modifications. After being fully satisfied with all the informations filled, click on 'Submit button'. Consequently, the registration of first stage shall be over. Thereafter 'Print Registration Slip" shall be displayed and Print of Registration Slip must be taken by clicking on Print Registration Slip.

Second Stage: After the completion of the procedure of first stage. 'Fee to be deposited [in INR]' shall be displayed with caption "Click here to proceed for payment". After clicking the above caption of "Click here to proceed for payment", home page of State Bank MOPS (Multi Option Payment System) shall be displayed comprising of 03 modes of payment viz.

(i) NET BANKING (ii) CARD PAYMENTS and (iii) OTHER PAYMENT MODES. After depositing the required fee by any one of the above prescribed modes, "Payment Acknowledgement Receipt (PAR)" shall be displayed along with detail of fee deposit, the print of which must be taken by clicking on "Print Payment Receipt."

Third stage : On completion of the procedure of second stage, click on "Proceed for final submission of application form as a result of which 'format' shall be displayed. The candidates are required to enter all the required informations in the format. The photo and signature, duly scanned shall be uploaded also. The candidate should scan his/her photograph and signature in the prescribed size (the size will be mentioned at the specified space in the On-line application). This should also be kept in notice that the photo must be latest passport size. In case the photo and signature, scanned in the prescribed size, are not uploaded, then the On-line system will not accept it. The procedure related for scanning of the photo and signature is laid down in the Appendix-1. After filling in all entries in the format, the candidates may click "PREVIEW" to see for themselves that all entries and informations are correctly entered and after satisfying themselves should click "Submit" button to forward the same to the Commission. It is essential that the candidate should fill all informations On-line correctly according to the instructions given and click the "Submit" button by the last date prescribed for submission of the application form. If the candidate does not click the "Submit" button, the ON-LINE application process shall not be completed finally and the candidate shall be accountable for this. After clicking the 'Submit' button, the candidate may take a print of the application to preserve it with them. In the event of any discrepancy, the candidate will be required to submit the said print in the office of the Commission, otherwise his/her request shall not be entertained.

2. Application Fee : In the ON-LINE Application process, after completing the procedure of first stage, Category wise prescribed examination fee is to be deposited as per Instructions provided in second stage.

The prescribed fee of examination for different categories is as under:-

(i)     Unreserved/Economically - Exam fee ` 200/- + On-line processing fee ` 25/- weaker Sections/Other                                                             Total = ` 225/-

Backward Class

(ii)   Scheduled Caste/               - Exam fee ` 80/- + On-line processing fee ` 25/- Scheduled Tribe                                                                        Total = ` 105/-

(iii)  Handicapped                      - Exam fee NIL + On-line processing fee ` 25/-

Total = ` 25/-

(iv)  Ex-Service Man                   - Exam fee ` 80/- + On-line processing fee ` 25/-

Total = ` 105/-

(v)   Dependents of the Freedom Fighters/Women - According to their original category

3.  The Basic Registration of such candidates will not be accepted who have been debarred from U.P. Public Service Commission and their period of debarment has not been completed. In addition to above, the applications submitted without requisite informations regarding debarment, if it is found at any stage in future that the application have been submitted concealing this fact, his/her candidature will be rejected at any stage and the commission will consider to debar them from all future examinations/selections including extension of debarment period. In this regard, if the claims of the candidates made in their On-line applications are not found true, they can be debarred not only from the examination in question but from all the future examinations and selections made by the commission also including other appropriate penalties.

4.  Modify Submitted Application: If a candidates comes to know about any error/ errors in the submitted application form except in name of the Examination and type of recruitment, Registered Mobile Number, E-mail ID, Aadhaar Number and such cases where prescribed fee for modified category is higher (In case of error in these entries, candidate may submit new online application with prescribed fee only as previously deposited fee will neither be adjusted nor refunded) he/she will be given only one opportunity to modify it/them according to the following procedure before the last date of the submission of application form. "Candidate has to click on 'Modify Submitted Application' under 'Online application process' in Candidate Segment. After that 'Candidate Personal Details' will be displayed on the screen to fill in Registration No., Date of Birth, Gender, Domicile and Category. After filling the Verification code the candidate has to click on the 'proceed' button following which for Authentication of the candidate OTP (One Time Password) will be sent on the registered mobile No. of the candidate and the 'Option Box' will be displayed on the screen to fill in the OTP. After the candidate has filled in the OTP and clicks on the 'proceed' button his/her previously submitted on line application form will be displayed on the screen. The candidate can submit his/her on line application form after making required modifications in it. This facility will be available to the candidates only one time within the last date of submission of application form".

5. The U.P. Public Service Commission shall hold a Written Examination at various Centres of the Districts mentioned in Appendix-2 of this advertisement. Only such candidates will be called for interview who are declared successful on the basis of above Examination. The selection will be made on the basis of total marks obtained by the candidates in written examination and interview. On some of these post, recruitment shall be made on the basis of total marks obtained in the written examination, according to the provision of concerned service rules of such posts. The date and centre of examination decided by the Commission, will be intimated to the candidates by means of their e-Admission certificate. The No. of Districts/Centres may be increased or decreased according to the decision of the Commission on the basis of final No. of applications received.

6. No. of Vacancies : Vacancies are as under :-

(i) General Recruitment

Sl.

No.

Name of Department Name of post No. of Vacancies Branch
1 Irrigation Deptt. Asstt. Engg. (Civil) 171 Civil
2 Irrigation Deptt. Asstt. Engg. (Mechanical) 73 Mechanical
3 Minor Irrigation Deptt. Asstt. Engg. (Agriculture) 09 Agriculture
4 Minor Irrigation Deptt. Asstt. Engg. (Civil) 04 Civil
5 Minor Irrigation Deptt. Asstt. Engg. (Mechanical) 05 Mechanical
6 Rural Engineering Deptt. Asstt. Engg. (Civil) 57 Civil
7 Public Works Deptt. (P.W.D) Asstt. Engg. (Civil) 108 Civil
8 Public Works Deptt. (P.W.D) Asstt. Engg. (Electrical/

Mechanical)

46 Electrical/

Mechanical

9 Mandi Parishad Asstt. Engg. (Civil) 31 Civil
10 Mandi Parishad Asstt. Engg. (Electrical/

Mechanical)

05 Electrical/

Mechanical

11 Housing and Urban

Planning Deptt.

Asstt. Engg. (Civil) 26 Civil
12 Housing and Urban

Planning Deptt.

Asstt. Engg. (Electrical/

Mechanical)

25 Electrical/

Mechanical

13 Nagar Vikas Vibhag Asstt. Engg. (Civil) 24 Civil
14 Nagar Vikas Vibhag Asstt. Engg. (Electrical/

Mechanical)

06 Electrical/

Mechanical

15 Nagar Vikas Vibhag Asstt. Engg. (Water)/'B'

Category Jalkal Engg.

19 Civil/Electrial

Mechanical

16 Medical Deptt. Asstt. Engg. (Civil) 04 Civil
17 Panchayati Raj Deptt. Engineer 01 Civil
18 Agriculture Deptt. U.P. Agriculture Service

Group 'B' (Engg. Branch)

12 Agriculture
19 Irrigation and Water

Re-Sources Deptt.

Bhoomi Sanrakshan

Adhikari/Technical Officer

31 Agriculture/

Civil

20 Energy Department Asstt. Director, Electrical

Security

21 Electrical
 

21

 

Labour Deptt.

 

Asstt. Engg. (Factories)

 

13

Civil/ Mechanical/ Electrical/Chemical

/Industrial

22 Labour Deptt. Asstt. Engg. (Boilers) 01 Mechanical
    Total 692  

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

continued..

 

UTTAR PRADESH PUBLIC SERVICE COMMISSION                                                                                                (2)
(ii) Special Recruitment   (Civil) (Public Works Department (P.W.D.) and Mandi Parishad) (Sl. No.- 7 and 9 in table of vacancies) from a university established by law in India or a qualification recognized by the Government as equivalent thereto.

Preferential: Acandidate who has (i) served in the Territorial Army for a minimum period of two years, or (ii) obtained a “B” Certificate of N.C.C. or (iii) Successfully completed one year training as trainee shall other things being equal, be given

preference in the matter of direct recruitment.

Sl.

No.

Name of Department Name of post No. of Vacancies Branch
1 Nagar Vikas Vibhag Asstt. Engg. (Water)/'B'

Category Jalkal Engg.

18

(SC/ST/OBC)

Civil/Electrical

Mechanical

2 Mandi Parishad Asstt. Engg. (Electrical/

Mechanical)

02

(OBC)

Electrical/

Mechanical

    Total 20   5. Assistant Engineer

(Electrical/ Mechanical) (Public Works Department (P.W.D) and Mandi Parishad)

(Sl. No.- 8 and 10 in table of vacancies)

Essential- Degree in Electrical or Mechanical Engineering

from an university established by law in India or any degree recognised equivalent by the Govt. or passed Associate Examination of Electrical or Mechanical Engineering from City and Guild Institute (Imperial College of Science and Technology South, Kesingston) or passed section 'A' and 'B' of Electrical or Mechanical Engineering of Associate Membership of Institution of Engineers London or completely eligible Associate Engineers (India) or passed section 'A' and 'B' in Electrical or Mechanical Engineering of Institution of Engineers (India).

Preferential: A candidate who has (i) served in the Territorial Army for a minimum period of two years, or (ii) obtained a “B” Certificate of N.C.C. shall other things being equal, be given

preference in matter of direct recruitment.

Pay Scale : Rs. 15,600-Rs. 39,100/- Grade Pay Rs. 5400/-.

Note:- No. of vacancies may increase or decrease on the request of the Govt. in special circumstances.

7. Reservation : The reservation for Scheduled Castes of U.P./Scheduled Tribes of U.P./Other Backward Class of U.P./Economically Weaker Sections candidates of U.P. shall be admissible in accordance with the provisions of relevant Govt. Rules. Accordingly, reservation for category under horizontal as Dependents of Freedom Fighters of U.P., Ex-serviceman of U.P., P.H. of U.P. and Women candidates shall be admissible on settlement of vacancies. Reservation for PH of U.P. shall be permissible for the notified/identified posts.

Note : (1) 'kklukns'k la[;k&39 fjV@dk&2@2019 fnukad&26 twu] 2019 }kjk 'kklukns'k la[;k& 18@1@99@dk&2@2006 fnukad&09 tuojh] 2007 ds izLrj&4 esa fn;s x;s izkfo/kku] ^^;g Hkh Li"V fd;k tkrk gS fd jkT;k/khu yksd lsokvksa vkSj inksa ij lh/kh HkrhZ ds izØe ij efgykvksa dks vuqeU; mijksDr vkj{k k dsoy mRrj izns'k dh ewy fuoklh efgykvksa dks gh vuqeU; gS** dks fjV ;kfpdk la[;k&11039@2018 fofiu dqekj ekS;kZ o vU; cuke mRrj izns'k jkT; o vU; rFkk lEc) 6 vU; fjV

;kfpdkvksa esa ek- mPp U;k;ky;] bykgkckn }kjk fnukad& 16&01&2019 dks vf/kdkjkrhr ¼ULTRA VIRES½ ?kksf"kr djus lEcU/kh fu kZ; ds vuqikyu esa 'kklukns'k fnukad&09&01&2007 ls izLrj&04 dks foyksfir fd, tkus dk fu kZ; fy;k x;k gSA mDr fu kZ; 'kklu }kjk ek- mPp U;k;ky; ds vkns'k fnukad&16-01-2019 ds fo#) nk;j fo'ks"k vihy ¼Mh½ la[;k&475@2019 esa ek- mPp U;k;ky; }kjk ikfjr gksus okys vfUre fu kZ; ds v/khu gksxkA (2)  The  Candidates  claiming  the  benefit  of reservation/age relaxation must obtain, in support of their category a certificate issued by competent authority on the proforma available on Appendix-3 of the Website of this detailed advertisement and shall submit the same to the Commission when asked for.

(3) All Reserved category candidates of U.P. must mention their Category/Sub Category in the Application. (4) Candidates claiming reservation/Age relaxation in more than one category will be entitled to only one concession whichever is more beneficial to them. (5) The Scheduled Caste, Scheduled Tribes, Other Backward Class, Economically Weaker Sections, Dependents of Freedom Fighter, Ex-service Man and PH candidates who are not the permanent residents of U.P. shall not be given the benefit of reservation/Age relaxation. (6) In case of women candidates the caste certificate issued from father side only will be treated valid.

8.  Conditions of Eligibility (For age relaxation only) : (I) Eligibility in case of Emergency Commissioned/Short Service Commissioned Officers: In accordance with the provision of the G.O. No. 22/10/1976-Karmik-2-85, dated 30-1-1985 Emergency Commissioned/Short Service Commissioned Officers who have not been released from Army but whose period of Army service has been extended for rehabilitation may also apply for this examination on the following conditions: (A) Such applicants will have to obtain a certificate of the competent authority of Army, Navy, Air Force to the effect that their period of Service has been extended for rehabilitation and no disciplinary action is pending against them. (B) Such applicants will have to submit in due course a written undertaking that in case they are selected for the post applied for, they will get themselves released immediately from the Army Service. The above facilities will not be admissible to Emergency/Short Service Commissioned Officers, if (a) he gets permanent Commission in the Army, (b) he has been released from the Army on tendering resignation, (c) he has been released from the Army on grounds of misconduct or physical disability or on his own request and who gets gratuity.

9. MARITAL STATUS : Male candidates who are married and have more than one wife living and female candidates who have married a person already having a wife, shall not be eligible unless the Hon'ble Governor has granted exemption from this condition.

10. EDUCATIONAL QUALIFICATION :

6. Assistant Engineer (Housing and Urban Planning Department) (Sl. No.- 11 in table

of vacancies)

Essential- Degree in Civil Engineering from a recognized college or university in India or abroad.

Preferential: Acandidate who has (i) served in the Territorial Army for a minimum period of two years, or (ii) obtained a “B” Certificate of N.C.C. shall other things being equal, be given

preference in the matter of direct recruitment.

7. Assistant Engineer (Electrical/ Mechanical)

(Sl. No.- 12 in table of vacancies)

Essential- Degree in Electrical or Mechanical Engineering from a recognized college or university in India or abroad.

Preferential: A candidate who has (i) served in the Territorial Army for a minimum period of two years, or (ii) obtained a “B” Certificate of N.C.C. shall other things being equal, be given

preference in the matter of direct recruitment.

8. Assistant Engineer (Civil) (Nagar Vikas Vibhag)

(Sl. No.- 13 in table

of vacancies)

vfuok;Z%& Hkkjr ;k fons'k esa fdlh ekU;rk izkIr dkWyst ;k fo'ofo|ky;

ls flfoy bathfu;fjax dh fMxhz ;k fMIykes k tks bULVhV;~ 'w ku vkQW   bathfu;lZ

¼bf M;k½ }kjk ekU; gks vkSj ftlds vk/kkj ij vH;FkhZ mDr bULVhV~;w'ku ds ,lkfs l,V esEcjf'ki ijh{kk ds lDs 'ku ^,* rFkk ^ch* ls eqDr gks ;k vH;FkhZ us flfoy bathfu;fjax esa bULVhV~;w'ku vkWQ bathfu;lZ ¼bf M;k½ dh

,lksfl,Vf'ki ijh{kk ds lsD'ku ^,* rFkk ^ch* vo'; ikl dj fy;s gksaA vf/kekuh%& vU; ckrkas ds leku gkus  s ij ,ls  s vH;fFk;Z  kas dks vf/keku fn;k tk,xk ftlus ¼1½ izknsf'kd lsuk esa U;wure 02 o"kZ dh vof/k rd lsok

dh gks] ;k ¼2½ jk"Vªh; dSMsV dksj dk ^^ch** izek k&i= izkIr fd;k gksA

9. Assistant Engineer (Electrical/ Mechanical) (Nagar Vikas Vibhag)

(Sl. No.- 14 in table of vacancies)

vfuok;Z%& Hkkjr ;k fons'k esa fdlh ekU;rk izkIr dkWyst ;k fo'ofo|ky; ls bysfDVªdy ;k edS  fs udy bta  hfu;fjxa  dh fMxzh tks bULVhV~;w'ku vkWQ bathfu;lZ ¼bf M;k½ }kjk ekU; gks vkSj ftlds vk/kkj ij vH;FkhZ mDr bULVhV~;w'ku ds ,lksfl,V esEcjf'ki ijh{kk ds lDs 'ku ^,* rFkk ^ch* ls eDq r gks ;k vH;FkhZ us edS  fs udy@byfs DVdª  y bta  hfu;fjxa  eas bULVhV~;w'ku vkWQ bathfu;lZ ¼bf M;k½ dh ,lksf'k,V esEcjf'ki ijh{kk ds lsD'ku ^,* rFkk

^ch* vo'; ikl dj fy;s gksaA vf/kekuh%& vU; ckrksa ds leku gksus ij

,sls vH;fFkZ;ksa dks vf/keku fn;k tk,xk ftlus ¼1½ izknsf'kd lsuk esa U;wure 02 o"kZ dh vof/k rd lsok dh gks] ;k ¼2½ jk"Vªh; dSMsV dksj dk

^^ch** izek k&i= izkIr fd;k gksA

10. Assistant Engineer (Water)/'B' Category Jalkal Engineer (Nagar Vikas Vibhag) (Sl. No.- 15 in table of vacancies) vfuok;Z%& Hkkjr ;k fon's k eas fdlh ekU;rk izkIr dkWyst ;k fo'ofo|ky; ls flfoy bta  hfu;fjax ;k bysfDVdª  y ;k edS  sfudy bathfu;fjax dh fMxzh tks bULVhV~;w'ku vkWQ bathfu;lZ ¼bf M;k½ }kjk ekU; gks vkSj ftlds vk/kkj ij vH;FkhZ mDr bULVhV~;w'ku ds ,lksf'k,V esEcjf'ki lsD'ku ^,* rFkk ^ch* ls eqDr gks ;k vH;FkhZ us flfoy bathfu;fjax@bysfDVdª  y@ eSdsfudy bathfu;fjax esa bULVhV~;w'ku vkWQ bathfu;lZ ¼bf M;k½ dk lDs 'ku ^,* rFkk ^ch* vo'; ikl fd;k gkAs

vf/kekuh%& vU; ckrksa ds leku gksus ij ,sls vH;fFkZ;ksa dks vf/keku

fn;k tk,xk ftlus ¼1½ izknsf'kd lus  k eas U;uw  re 02 o"kZ dh vof/k rd lsok dh gks] ;k ¼2½ jk"Vªh; dSMsV dksj dk ^^ch** izek k&i= izkIr fd;k gksA

Sl.

No.

Name of post/

Name of Deptt.

Qualifications
1. Assistant Engineer

(Civil/Mechanical) (Irrigation department)

(Sl. No.- 1 and 2 in table of vacancies)

Essential- Must possess a degree in Civil or Mechanical

Engineering as thecase may be, from an institution or university recongised by the Government, or be a qualified Associate Member of the institution of Engineer (India) Civil Engineering Branch or Mechanical Engineering Branch, asthe case may be. PREFERENTIAL: A candidate who has. (i) served in the Territorial Army for a minimum period of two years, or (ii) obtained a “B” Certificate of N.C.C. or (iii) Successfully completed one year training as trainee, shall other things being

equal, be given preference in the matter of direct recruitment.

11. Assistant Engineer (Civil) (Medical Department)

(Sl. No.- 16 in table of vacancies)

Essential- (A) Must possess a Bachelor degree in Civil Engineering from a University established by Law in India or degree recognised by the Government as equivalent there to

(B) Associate Member of Institute of Engineers (India) in Civil Engineering branch.

Preferential: Acandidate who has (1) Served in the Territorial Army for a minimum period of 02 years or (2) obtained a “B” Certificate of N.C.C. But a candidate who is a trainee, for Assistant Engineer (Civil) post, shall other things being equal,

be given preference in matter of direct recruitment.

2. Assistant Engineer (Agriculture/Civil/ Mechanical) (Minor Irrigation department)

(Sl. No.- 3, 4 and 5 in table of vacancies)

Essential- Must possess a Bachelor degree in Agriculture/ Civil or Mechanical Engineering or a degree recognised by the Government as equivalent there to or has passed Associate Membership Examination is section “A” and “B” in Civil or Mechanical Engineering from Institution of Engineers (India). Preferential: Acandidate who has (i) Served in the Territorial Army for a minimum period of two years, or (ii) obtained a “B” Certificate of N.C.C. shall other things being equal be given

preference in the matter of direct recruitment.

12. Engineer (Panchayati Raj Department)

(Sl. No.- 17 in table

table of vacancies)

Essential- A Bachelor degree in Civil Engineering from a University established by Law in India or qualification recognised by the Government as equivalent there to.

Preferential A candidate who has (i) Served in the Territorial Army for a minimum period of 02 years or (2) obtained a “B” Certificate of N.C.C. shall other things being equal, be given

preference in matter of direct recruitment.

3. Assistant Engineer (Civil) (Rural Engineering Department)

(Sl. No.- 6 in table of vacancies)

Essential-Mustpossess(A)a Bachelordegreein CivilEngineering from an Institution or University recognized by the Government, or (B) has passed Associate Membership Examination in section “A” and “B” in Civil Engineering from Institution of Engineers (India).

Preferential: A candidate who has (i) served in the Territorial Army for a minimum period of two years, or (ii) obtained a “B” Certificate of N.C.C. shall other things being equal, be given

preference in the matter of direct recruitment.

13. U.PAgriculture Service Group “B” (Engineeringbranch) (Agriculture

Department)

Essential- Bachelor's degree in Agriculture Engineering from a University established by Law in India or a qualification recognised by Government as equivalent there to.

Preferential (i) Post graduate degree inAgricultural Engineering

from a university established by law in India or a qualification

continued..

4. Assistant Engineer Essential-Mustpossessa Bachelor'sdegreein Civil Engineering
 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

continued..

 

UTTAR PRADESH PUBLIC SERVICE COMMISSION                                                                                                                         (4)
be treated disqualified. Regarding Application :

1.  On clicking “View Application status” option in Candidate Segment page you can see current status of candidate.

2. On clicking “Result” option in Candidate Segment page candidate can see result status of periodically.

3.  “Interview/Exam Schedule” option in Candidate Segment page candidate can see interview and examination schedule details periodically.

4. On clicking “Key Answer Sheet” candidate can download key answer sheet.

5. On clicking “Admit Card/Hall Ticket” candidate can download their Admit Card using with some basic credential of candidate.

6. On clicking “List of Rejected Candidate” candidate can view Rejected candidate list.

7. On clicking “Syllabus” candidate can view syllabus of particular examination. [Candidates applying on-line need NOT send hard copy of the Online Application filled

by them on-line or any other document/certificate/testimonial to the Uttar Pradesh Public

Service Commission. However they are advised to take printout of the On-line Application and retain it for further communication with the UPPSC.] [The Candidates applying for the examination should ensure that they fulfill all eligibility conditions for admission to examination. Their admission at all the stages of the examination will be purely provisional subject to satisfying the prescribed eligibility conditions.] UPPSC takes up verification of eligibility conditions with reference to original documents at subsequent stages of examination process.

GENERAL INSTRUCTIONS

1.            In no circumstances, applications of any stage shall be accepted after the last prescribed date and time. Applications found without requisite informations and without photograph and signature, even when received in time, may be summarily rejected.

2.            In the On-line system the candidates must ensure that all the requisite informations have been duly filled and must click the submit Button by the Last prescribed Date & Time. Candidates must take the print and keep it safely. In any discrepancy candidates will have to produce the said print otherwise no request shall be entertained.

3.            Those candidates, willing to take the benefit of the reservation/age relaxation must obtain a certificate, issued by the competent authority, in support of the reserved category, in the prescribed format printed in this detailed advertisement (Appendix-3) and submit the same to the Commission, whenever required to do so. Those claiming more than one reservation/Age relaxation will be given only one such concession, which will be more beneficial. The candidates who are not originally domiciled of U.P. belonging to SC, ST, O.B.C., EWS, dependants of freedom fighters, Ex-Servicemen, skilled players and P.H. are not entitled to benefit of reservation/age relaxation. In case of the women candidates, the caste certificate issued from father side will be treated valid.

4.            The Commission do not advise to candidates about their eligibility. Therefore, they should carefully read the advertisement and when satisfied about their eligibility conditions of the advertisement, then only apply. The candidates must possess all the requisite qualifications till the last date for submitting the applications.

5.            In the category of dependants of the freedom fighters only sons, daughters, grandsons (Son's son/Daughter's son) and grand daughters (son's daughter/daughter's daughter, married/unmarried) are covered. It is advised that the candidates of the aforesaid category must obtain the reservation certificate from the District Magistrate in terms of Govt. Order No. 453/79-V-1-15-1(Ka)14-2015 dated 07.04.2015 in the prescribed format and submit the same.

6.            In the event of involvement of a candidate in the concealment of any important information, pendency of any case/criminal case, conviction, more than a husband or wife being alive, submission of facts in a distorted manner malpractice, canvassing for candidature/selection etc., the Commission reserves the right to reject the candidature and debar him from appearing in the examination in question and in all other future examinations and selections.

7.            In case the candidates feel any problem in the "On-line Application" they may get their problem resolved by contacting over phone or on Website clicking 'Contact us'.

8.            The name of Districts for Examination are available in the advertisement in Appendix-

2. In the same way the plan of Examination and the syllabus on Appendix-4. Detailed Application Form:

At the top of the page, there is a Declaration. The candidates are advised to go through the content of the Declaration carefully. Candidate has the option either to agree or disagree with the content of Declaration by clicking on 'IAgree' or 'I do not agree' buttons. In case the candidate opts to disagree, the application will be dropped, and the procedure will be terminated. Accepting to agree only will submit the candidate's On-line Application.

Notification Details :

This section shows information relevant to Notification

Personal Details

This section shows information about candidate's personal details i.e. Registration Number, candidate's name, Father/Husband's name, Gender, DOB, UP domicile, Category, Marital status, email ID and contact number.

Other Details of Candidate

Other details of candidate shows the information details about UP Freedom Fighter, Ex Army service duration and your physical deformity.

Education & Experience Details

Its shows your educational and experience details.

Candidate address, photo & signature details

Here you will see your complete communication address and photo with your signature.

Declaration segment

At the bottom of the page there is a 'Declaration' for the candidates. Candidates are advised to go through the content of the Declaration carefully.

After filling all above particulars there is provision for preview your detail before final submission of application form on clicking on “Preview” button.

Preview page will display all facts/particulars that you have mentioned on entry time, if you are sure with filled details then click on “Submit” button to finally push data into server with successfully submission report that you can print.

Otherwise using “Back” button you can modify your details.

[CANDIDATES ARE ADVISED TO TAKE A PRINT OF THIS PAGE BY CLICKING ON THE “PRINT” OPTION AVAILABLE]

For other Information: For other Information candidates are advised to select desired option in 'Home Page' of Commission's website http://uppsc.up.nic.in

CANDIDATE SEGMENT

LAST DATE FOR RECEIPT OF APPLICATIONS : On-line Application process must be completed (including filling up of Part-I, Part-II and Part-III of the Form) before last date of form submission according to Advertisement, after which the Web-Link will be disabled.
ifjf'k"V&1

The Procedure relating to upload Photo & Signature.

Guide Lines for Scanning Photograph with Signature

1.   Paste the Photo on any white paper as per the above required dimensions. Sign in the Signature Space provided. Ensure that the signature is within the box.

2.   Scan the above required size containing photograph and signature. Please do not scan the complete page.

3.   The entire image (of size 3.5 cm by 6.0 cm) consisting of the photo along with the signature is required to be scanned, and stored in * .jpg, .jpeg, .gif, .tif, .png format on local machine.

4.   Ensure that the size of the scanned image is not more than 50 KB.

5.   lf the size of the file is more than 50 KB, then adjust the settings of the scanner such as the DPI resolution, no. colours etc., during the process of scanning.

6.   The applicant has to sign in full in the box provided. Since the signature is proof of identity, it must be genuine and in full; initials are not sufficient. Signature in CAPITAL LETTERS is not permitted.

7.   The signature must be signed only by the applicant and not by any other person.

8.   The signature will be used to put on the Hall Ticket and wherever necessary. If the Applicant’s signature on answer script, at the time of the examination, does not match the signature on the Hall Ticket, the applicant will be disqualified.

Sample Image & Signature :-

width= 3.5 cm Photo

 

 

 

 

Signature

ifjf'k"V  & 2

The name of districts where Exam will be held are Lucknow and Prayagraj.

The No. of Districts/Centers may be increased or decreased according to the decision of commission on the basis of final No. of applications received.

ifjf'k"V  & 3

m0iz0 dh vuqlwfpr tkfr rFkk vuqlwfpr tutkfr ds fy;s tkfr izek k&i=

izekf kr fd;k tkrk gS fd Jh@Jherh@dqekjh ----------------------------------- lqiq=@lqiq=h Jh----------------------------

fuoklh xzke -------------------- rglhy ---------------- uxj ------------------------------------- ftyk--------------- mÙkj izns'k

jkT; dh ------------------------- tkfr ds O;fDr gSa ftls lafo/kku ¼vuqlwfpr tkfr½ vkns'k] 1950 ¼tSlk fd le;≤ ij la'kksfèkr gqvk½@ lafo/kku ¼vuqlwfpr tutkfr] mÙkj izns'k½ vkns'k] 1967 ds vuqlkj vuqlwfpr tkfr@vuqlwfpr tutkfr ds :i esa ekU;rk nh xbZ gSA

Jh@Jherh@dqekjh ---------------------------------------- rFkk vFkok mudk ifjokj mÙkj izns'k ds ----------------------

xzke ------------------- rglhy --------------------- uxj -------------------- ftyk---------- esa lkekU;r;k jgrk gSA

LFkku --------------------------                                                  gLrk{kj   -----------------------------

fnuakd -----------------------                                                  iwjk uke -----------------------------

eqgj ---------------------------                                                in uke -----------------------------

ftykf/kdkjh@vfrfjDr ftykf/kdkjh@flVh eftLVsªV@ijxuk eftLVsªV@rglhynkj@ vU; osru

Hkksxh eftLVsªV ;fn dksbZ gks@ftyk lekt dY;k k vf/kdkjh

mÙkj izns'k ds vU; fiNM+s oxZ ds fy, tkfr izek k&i=

izekf kr fd;k tkrk gS fd Jh@Jherh@dqekjh ------------------------------------- lqiq=@lqiq=h Jh ----------------------

--------------------- fuoklh  xzke  ------------------------------  rglhy  --------------------  uxj  ------------------  ftyk -------------------------

mÙkj izns'k jkT; dh--------- fiNM+h tkfr ds O;fDr gSaA ;g tkfr mÙkj izns'k yksd lsok ¼vuqlwfpr

tkfr;ksa] vuqlwfpr tutkfr;ksa rFkk vU; fiNM+s oxksZa ds fy;s vkj{k k½ vf/kfu;e] 1994 ¼;Fkkla'kksf/kr½ dh vuqlwph&,d ds vUrxZr ekU;rk izkIr gSA

;g Hkh izekf kr fd;k tkrk gS fd Jh@Jherh@dqekjh---------------------- iwoksZDr vf/kfu;e]

1994 ¼;Fkkla'kksf/kr½ dh vuqlwph&nks ¼tSlk fd mÙkj izns'k yksd lsok½ ¼vuqlwfpr tkfr;ksa] vuqlwfpr tutkfr;ksa vkSj vU; fiNM+s oxksZa ds fy;s vkj{k ¼la'kks/ku½ vf/kfu;e] 2001 }kjk izfrLFkkfir fd;k x;k gS ,oa tks mÙkj izns'k yksd lsok ¼vuqlwfpr tkfr;ksa] vuqlwfpr tutkfr;ksa vkSj vU; fiNM+s oxksZa ds fy;s vkj{k ¼la'kks/ku½ vf/kfu;e] 2002 }kjk la'kksf/kr dh x;h gS] ls vkPNkfnr ugha gSA buds ekrk&firk dh fujarj rhu o"kZ dh vof/k ds fy;s ldy okf"kZd vk; vkB yk[k #i;s ;k blls vf/kd ugha gS rFkk buds ikl èkudj vf/kfu;e] 1957 esa ;Fkk fofgr NwV lhek ls vf/kd lEifRr Hkh ugha gSA

Jh@Jherh@dqekjh -------------------------------------------------------- rFkk@vFkok mudk ifjokj mÙkj izns'k ds xzke ---------------------------------  rglhy  --------------------------------  uxj  -----------------------------  ftyk--------------------------------------------------------------------------------------- esa

lkekU;r;k jgrk gSA

continued..

NOTIFICATIONS/ADVTS
All Notification/Advertisements
ONLINE FORM SUBMISSION
1. Candidate Registration (First Stage)
2. Fee Deposition / Reconciliation (SECOND STAGE)
3. Submit Application Form (Third Stage)
APPLICATION FORM STATUS
Update your transaction ID by Double Verification mode View Application Status
List of Applications Having photo related Objections
Print Duplicate Registration Slip
Print Detailed Application Form
EXAMINATION SEGMENT
Print Address Slip for sending Documents to commission [Only for Direct Recruitment]
DOWNLOAD SEGMENT
Download Admit Card
Download interview letter
Download Syllabus
Know your Registration No.
Click here to view Key Answer Sheet

 

 

UTTAR PRADESH PUBLIC SERVICE COMMISSION                               (5)
LFkku --------------------------                                                  gLrk{kj   -----------------------------

fnuakd -----------------------                                                  iwjk uke -----------------------------

eqgj ---------------------------                                                in uke -----------------------------

ftykf/kdkjh@vfrfjDr ftykf/kdkjh@flVh  eftLVsªV@ijxuk eftLVsªV@rglhynkjA

(iii)  BLA-Both legs and both arms affected

(iv)  OL-One leg affected (right or left)

(a)          Imparied reach

(b)          Weakness of grip

(c)          Ataxic

(v)       OA-One arm affected

(a)          Imparied reach

(b)          Weakness of grip

(c)          Ataxic

(vi)  BH-Stiff back and hips (Cannot sit or stood)

(vii) MW- Muscular weakness and limited physical endurance

B.      Blindness or Low Vision:

(i)            B-Blind

(ii)           PB-Partialy Blind

C.      Hearing impairment:

(i)            D-Deaf

(ii)           PD-Partially Deaf

(Delete the category whichever is not applicable)

2.            This condition is progressive/non-progressive/likely to improve/ not likely to improve. Re-assessn of this case is not recommended/is recommended after a period of .........

year.......... months.

3.            Percentage of disability in his/her case is.......... percent.

4.            Sh./Smt./Kum..................... meets the following physical requirements discharge of

his/her duties:

(i)     F-can perform work by manipulating with fingers.                                           Yes/No

(ii)    PP-can perform work by pulling & pushing.                                                     Yes/No

(iii)  L-can perform work by lifting.                                                                             Yes/No

(iv)  KC-can perform work by kneeling and crouching.                                          Yes/No

(v)   B-can perform work by bending.                                                                       Yes/No

(vi)  S-can perform work by sitting.                                                                           Yes/No

(vii) ST-can perform work by standing.                                                                    Yes/No

(viii)W-can perform work by walking                                                                       Yes/No

(ix)  SE-can perform work by seeing.                                                                       Yes/No

(x)   H-can perform work by hearing/speaking.                                                       Yes/No

(xi)  RW-can perform work by reading and writing.                                                 Yes/No

 

(Dr. .................)                                   (Dr. .................)                         (Dr................... )

Member                                             Member                                   Chairperson

Medical Board                                  Medical Board                         Medical Board Countersigned by the Medical Superintendent/ CMO/HQ Hospital

(with seal)

Strike out which is not applicable.

¼izi=&I½  mRrj izns'k ljdkj

dk;kZy; dk uke -------------------------------------------------------------------

vkfFkZd :i ls detksj oxZ ds lnL; }kjk izLrqr fd;k tkus okyk vk; ,oa ifjlEifRr izek k&i=

izek k&i= la[;k& ------------------------                                      fnukad& ------------------------

foRrh; o"kZ ------------------------ ds fy, ekU;

izekf kr fd;k tkrk gS fd Jh@Jherh@dqekjh ----------------------------------------------- iq=@ifr@iq=h --------------

----------------------------------------- xzke@dLck ----------------------------------------- iksLV vkWfQl ----------------------- Fkkuk -------------------

-- rglhy ----------------------- ftyk -------------------------------------- jkT; ------------------- fiudksM ------------------- ds LFkk;h

fuoklh gSa] ftudk QksVksxzkQ uhps vfHkizekf kr gS] vkfFkZd :i ls detksj oxZ ds lnL; gSa] D;ksafd foRrh; o"kZ --------------------- esa buds ifjokj dh dqy okf"kZd vk; 8 yk[k ¼vkB yk[k #i;s ek=½ ls de gSA

buds ifjokj ds LokfeRo esa fuEufyf[kr esa ls dksbZ Hkh ifjlEifRr ugha gS%&

I.   5 ¼ik¡p½ ,dM+ d`f"k ;ksX; Hkwfe vFkok blls ijA

II.  ,d gtkj oxZ QhV vFkok blls vf/kd {ks=Qy dk ¶ySVA

I.II vf/klwfpr uxjikfydk ds vUrxZr 100 oxZ xt vFkok blls vf/kd dk vkoklh; Hkw[k MA

IV. vf/klwfpr uxjikfydk ls brj 200 oxZ xt vFkok blls vf/kd dk vkoklh; Hkw[k MA

2- Jh@Jherh@dqekjh ------------------------------------- tkfr ------------- ds lnL; gSa] tks vuqlwfpr tkfr]

vuqlwfpr tutkfr rFkk vU; fiNM+s oxksZa ds :i esa vf/klwfpr ugha gSA

  vkosnd dk ikliksVZ lkbZt dk vfHkizekf kr QksVksxzkQ gLrk{kj------- ¼dk;kZy; dk eqgj lfgr½

iwjk uke ----------------------------------------------

inuke   -----------------------------------------------

ftykf/kdkjh@vfrfjDr ftykf/kdkjh@flVh eftLVsªV@ijxuk eftLVsªV@rglhynkjA

¼izi=&II½

vkfFkZd :i ls detksj oxZ ds ykHkkFkZ Lo;a ?kks"k kk i= Lo;a  ?kks"k kk  i=

eSa -----------------------------------------------  iq=@iq=h@iRuh  -------------------------------------------------------  xzke@dLck  --------------

---------------------------  iksLV  vkWfQl  -----------------------  Fkkuk  ---------------------  Cykd  ---------------------  rglhy  -----------------------

ftyk -------------------------------------- jkT;           us vkfFkZd :i ls detksj oxZ ds izek k i= gsrq vkosnu

fn;k gS] ,rn~}kjk ?kks"k kk djrk@djrh gw¡%&

1-          eSa---------- tkfr ls lEcU/k j[krk@j[krh gw¡] tks mRrj izns'k gsrq vf/klwfpr vuqlwfpr

tkfr] vuqlwfpr tutkfr ,oa vU; fiNM+k oxZ dh lwph esa lwphc) ugha gSA

2-          esjs ifjokj dh dqy lzks=ksa ¼osru] d`f"k] O;olk;] is'kk bR;kfn½ ls dqy okf"kZd vk; #- ---------

-------------------- ¼'kCnksa esa½ gSA

3-          esjs ifjokj ds ikl mfYyf[kr vk; ds flok; vFkok blds vfrfjDr vU;= dksbZ ifjlEifRr ugha gSA

vFkok

dbZ LFkkuksa ij fLFkr ifjlEifRr;ksa dks tksM+us ds i'pkr~ Hkh eSa ¼uke½------------ vkfFkZd :i ls

detksj oxZ ds nk;js esa vkrk@vkrh gw¡A

4-          eSa ?kks"k kk djrk@djrh gw¡ fd esjs ifjokj dh lHkh ifjlEifRr;ksa dks tksM+us ds i'pkr~ fuEufyf[kr esa ls fdlh Hkh lhek ls vf/kd ugha gS&

I.   5 ¼ik¡p½ ,dM+ d`f"k ;ksX; Hkwfe vFkok blls ijA

II.  ,d gtkj oxZ QhV vFkok blls vf/kd {ks=Qy dk ¶ySVA

III. vf/klwfpr uxjikfydk ds vUrxZr 100 oxZ xt vFkok blls vf/kd dk vkoklh; Hkw[k MA

IV. vf/klwfpr uxjikfydk ls brj 200 oxZ xt vFkok blls vf/kd dk vkoklh; Hkw[k MA

eSa izekf kr djrk@djrh gw¡ fd esjs }kjk mijksDr tkudkjh esjs Kku vkSj fo'okl ds vuqlkj lR; gS vkSj eSa vkfFkZd :i ls detksj oxZ ds fy, vkj{k k lqfo/kk izkIr djus gsrq ik=rk /kkj k djrk@djrh gw¡A ;fn esjs }kjk nh xbZ tkudkjh vlR;@xyr ik;h tkrh gS rks eSa iw kZ :i esa tkurk@tkurh gw¡ fd bl vkosnu i= ds vk/kkj ij fn;s x;s izek k i= ds }kjk 'kS{kf kd laLFkku esa fy;k x;k izos'k@yksd lsokvksa ,oa inksa esa izkIr dh xbZ fu;qfDr fujLr dj nh tk;sxh@dj fn;k tk;sxk vFkok bl izek k i= ds vk/kkj ij dksbZ vU; lqfo/kk@ykHk izkIr fd;k x;k gS mlls Hkh oafpr fd;k tk ldsxk vkSj bl lEcU/k esa fof/k ,oa fu;eksa ds v/khu esjs fo#) dh tkus okyh dk;Zokgh ds fy, eSa mRrjnk;h jgw¡xk@jgw¡xhA

uksV%& tks ykxw ugha gks mls dkV nsaA

vkosnd@vkosfndk dk gLrk{kj rFkk iwjk ukeA

LFkku %& fnukad %&

m-iz-  yksd  lsok  ¼'kkjhfjd  :i  ls  fodykax]  Lora=rk  laxzke  lsukfu;ksa  ds  vkfJrksa  vkSj HkwriwoZ lSfudksa ds fy, vkj{k k½ vf/kfu;e 1993 ¼;Fkkla'kksf/kr½ ds vuqlkj Lora=rk

laxzke lsukuh ds vkfJr ds fy, izek k&i=

izek k&i=

izekf kr fd;k tkrk gS fd Jh@Jherh@dqekjh ------------------------------------------- fuoklh-------------- xzke

-------------------- rglhy ----------------------- uxj ------------------------------------- ftyk ---------------------------- mÙkj izns'k yksd

lsok ¼'kkjhfjd :i ls fodykax] Lora=rk laxzke lsukfu;ksa ds vkfJr vkSj HkwriwoZ lSfud ds fy, vkj{k vf/kfu;e1993 ds vuqlkj Lora=rk laxzke lsukuh gSa vkSj Jh@Jherh@dqekjh ¼vkfJr½ ----------------------------

iq=@iq=h@ikS= ¼iq= dk iq= ;k iq=h dk iq=½@ikS=h ¼iq= dh iq=h ;k iq=h dk iq=h½ ¼fookfgr vFkok vfookfgr½ mijkafdr vf/kfu;e 1993 ¼;Fkkla'kksf/kr½ ds izko/kkuksa ds vuqlkj mDr Jh@Jherh

¼Lora=rk laxzke lsukuh½---------------- ds vkfJr gSaA

gLrk{kj   -------------------------------------

iwjk uke -------------------------------------

LFkku --------------------------                                            eqgj --------------------------------------------

fnuakd -----------------------                                             ftykf/kdkjh    -----------------------------

lhy  -------------------------------------------

dq'ky  f[kykfM+;ksa  ds  fy;s  izek k&i=  tks  m-iz-  ds  ewy  fuoklh  gSa 'kklukns'k  la[;k&22@21@1983&dkfeZd&2  fnukad  28  uoEcj]  1985 izek k&i=  ds  QkeZ  &  1  ls  4  izk:i  &1

¼ekU;rk izkIr ØhM+k@[ksy esa vius ns'k dh vksj ls vUrjkZ"Vªh; izfr;ksfxrk esa Hkkx ysus okys f[kykM+h ds fy;s½

lEcfU/kr [ksy dh jk"Vªh; QsMjs'ku@jk"Vªh; ,lksfl,'ku dk uke---------------- jkT; ljdkj dh

lsokvksa@inksa ij fu;qfDr ds fy, dq'ky f[kykfM+;ksa ds fy, izek k&i=

izekf kr fd;k tkrk gS fd Jh@Jherh@dqekjh----------------------- vkRet@iRuh@vkRetk

Jh -------------------------------------------- fuoklh ------------------------- iwjk irk -------------------- us fnukad------------- ls

fnukad --------------------- rd ----------------------- ¼LFkku dk uke½ esa vk;ksftr--------------- ¼ØhM+k@[ksy&dwn

dk uke½ dh izfr;ksfxrk@VwukZesUV esa ns'k dh vksj ls Hkkx fy;kA

muds Vhe ds }kjk mDr izfr;ksfxrk@VwukZesUV esa------------- LFkku izkIr fd;k x;kA

;g izek k&i= jk"Vªh; QsMjs'ku@jk"Vªh; ,lksfl,'ku@¼;gk¡ laLFkk dk uke fn;k tk;s½ ---------------------------

esa miyC/k fjdkMZ ds vk/kkj ij fn;k x;k gSA

LFkku --------------------------                                            gLrk{kj   --------------------------------------

fnuakd -----------------------                                             uke      ----------------------------------------------

in -----------------------------------------------

laLFkk dk uke-----------------------------

eqgj ---------------------------------------------

uksV % ;g izek k&i= us'kuy QsMjs'ku@us'kuy ,lksfl,'ku ds lfpo }kjk O;fDrxr :i ls fd;s x;s gLrk{kj gksus ij gh ekU; gksxkA

m-iz- ds fodykaxksa ds fy, izek k&i=

DISABILITY CERTIFICATE FOR PHYSICALLY HANDICAP OF U.P. NAME & ADDRESS OF THE INSTITUTE/HOSPITAL

Certificate No. .................                                                                          Date .............

DISABILITY  CERTIFICATE                                Recent photograph of the candidate

showing the disability duly attested by the Chairperson of the Medical Board

This is to certified that Shri/Smt/Kum............................................... son/wife/daughter of

Shri ............................................ age ........................ Sex.............................. identification

mark (s)................................. is suffering from permanent disability of following category.

A. Locomotor or cerebral palsy:

(i)     BL-Both legs affected but not arms.

(ii)    BA-Both arms affected

(a)          Imparied reach

(b)          Weakness or grip

izk:i  & 2

¼ekU;rk izkIr ØhM+k@[ksy esa vius izns'k dh vksj ls jk"Vªh; izfr;ksfxrk esa Hkkx ysus

continued..

 

 

UTTAR PRADESH PUBLIC SERVICE COMMISSION                                     (6)
okys f[kykM+h  ds fy;s½

lEcfU/kr [ksy dh izns'kh; ,lksfl,'ku dk uke ------------------------------ jkT; ljdkj dh lsokvksa@inksa ij fu;qfDr ds fy, dq'ky f[kykfM+;ksa ds fy, izek k&i=

izekf kr fd;k tkrk gS fd Jh@Jherh@dqekjh------------------------ vkRet@iRuh@vkRetk

Jh ------------------------------------------------------- fuoklh ¼iwjk irk½ ----------------------------------------- us fnukad-------------- ls

fnukad --------------------- rd----------- esa ¼ØhM+k@[ksy&dwn dk uke½ dh izfr;ksfxrk ¼VwukZesUV LFkku dk

uke½ -------------------------------------- vk;ksftr jk"Vªh;-------------------- esa  ¼ØhM+k@[ksy&dwn  dk  uke½ dh

izfr;ksfxrk@VwukZesUV esa izns'k dh vksj ls Hkkx fy;kA

muds Vhe ds }kjk mDr izfr;ksfxrk@VwukZesUV esa------------- LFkku izkIr fd;k x;kA

;g izek k&i=------------------ ¼izns'kh; la?k dk uke½ esa miyC/k fjdkMZ ds vk/kkj ij fn;k x;k gSA

LFkku --------------------------                                            gLrk{kj   -------------------------------------

fnuakd -----------------------                                            uke --------------------------------------------

in ---------------------------------------------

laLFkk dk  uke --------------------------

irk --------------------------------------------

eqgj -------------------------------------------

uksV % ;g izek k&i= izns'kh; [ksy&dwn la?k ds lfpo }kjk O;fDrxr :i ls fd;s x;s gLrk{kj gksus ij gh ekU; gksxkA

iz'u Hkh lfEefyr gksaxs ftudk mÙkj mEehnokj fo'ks"k v/;;u fd;s fcuk gh ns ldsaxsA

CIVIL ENGINEERING PAPER – 1 PART – A

ENGINEERING MECHANICS, STRENGTH OF MATERIALS AND STRUCTURAL ANALYSIS.

Units and Dimensions, SI units, vectors, concept of force, Concept of particle and rigid body Concurrent, Non- Concurrent and parallel forces in a plane, moment of force and varignon`s theorem free body diagram, conditions of equilibrium Principle of virtual work, equivalent force system.

First and second Moment of area, Mass moment of inertia, Static Friction, inclined plane and bearings, kinematics and kinetics, kinematics in Cartesion and Polar Coordinates, motion under uniform and non-uniform acceleration, motion under gravity, Kinetics of particle: Momentum and Energy principles, D` Alembert`s principle, Collision of elastic bodies, rotation of rigid, bodies, simple harmonic motion.

STRENGTH OF MATERIALS:

Simple Stress and Strain, Elastic constants, axially loaded compression members, Shear force and bending moment, theory of simple bending, bending stress, Shear Stress, Beams of uniform strength, Leaf Spring, close coiled helical springs, Strain Energy in direct stress, bending & shear. Deflection of beams; Macaulay's method, Mohr's Moment area method, Conjugate beam method, unit load method, Torsion of shafts, Transmission of power, Elastic stability of columns, Euler's Rankin's and Secant formulae. Principal stresses and strains in two dimensions, Mohr's Circle, Theories of Elastic Failure, Thin and Thick cylinder, Stresses due to internal and external pressure- Lame's equations.

STRUCTURALANALYSIS:

Castiglianios theorems I and II, Unit load method of consistent deformation applied to beams and pin jointed trusses. Slope-deflection, moment distribution, Kani's method of analysis and column Analogy method applied to indeterminate beams and rigid frames. Rolling loads and influence lines: Influence lines for reactions of beam, shear force and bending moment at a section of beam. Criteria for maximum shear force and bending moment in beams traversed by a system of moving loads, influence lines for simply supported plane pin jointed trusses, Arches: Three hinged, two hinged and fixed arches, rib shortening and temperature effects, influence lines in arches, Matrix methods of analysis: Force method and displacement method of analysis of indeterminate beams and rigid frames. Plastic Analysis of beams and frames: Theory of plastic bending, plastic analysis, statical method, Mechanism method. Unsymmetrical bending: Moment of inertia, product of inertia, position of neutral axis and principal axis, calculation of bending stresses.

PART – B

DESIGN OF STRUCTURES: STEEL, CONCRETE AND MASONRY STRUCTURES. STRUCTURAL STEEL DESIGN:

Structural steel: Factors of safety and load factors, rivetted, bolted and welded joints and its connections, Design by working, stress/limit state method of tension and compression member, beams of built up section, rivetted and welded plate girders, gantry girders, stancheons with battens and lacings, slab and gussetted column bases, Design of highway and railway bridges: Through and deck type plate girder, Warren girder, Pratt truss.

DESIGN OF CONCRETE AND MASONRY STRUCTURES:

Reinforced Concrete: Working Stress and Limit State Method of design- Recommendations of B.I.S. codes, design of one way and two way slabs, stairs-case slabs, simple and continuous beams of rectangular, T and L sections, compression members under direct load with or without eccentricity, isolated and combined footings, Cantilever and counter-fort type retaining walls, Water tanks: Design requirements as per

B.I.S. code for rectangular and circular tanks resting on ground, Prestressed concrete: Methods and systems of prestressing, anchorages, analysis and design of sections for flexure based on working stress, losses of prestress, Earth quake resistant design of building as per BIS code. Design of brick masonry as per I. S. Codes, Design of masonry retaining walls.

PART – C

Building Materials, Construction Technology, Planning and Management

Building Materials: Physical properties of construction materials with respect to their use: stones bricks, tiles, lime, glass, cement, mortars, Concrete, concept of mix design, pozzolans, plasticizers, super plasticizers, Special concrete: roller compacted concrete, mass concrete, self compacting concrete, ferro cement, fibre reinforced concrete, high strength concrete, high performance concrete, Timber: properties, defects and common preservation treatments, Use and selection of materials for various uses e.g. Low cost housing, mass housing, high rise buildings.

Constructions Technology, Planning and Management:

Masonry constructions using brick, stone, construction detailing and strength characteristics paints, varnishes, plastics, water proofing and damp proofing materials. Detailing of walls, floors, roofs, staircases, doors and windows. Plastering, pointing,

izk:i  & 3

¼ekU;rk izkIr ØhM+k@[ksy esa vius fo'ofo|ky; dh vksj ls vUrfoZ'ofo|ky; izfr;ksfxrk esa Hkkx ysus okys f[kykM+h ds fy;s½

fo'ofo|ky; dk uke --------------------------- jkT; Lrj dh lsokvksa@inksa ij fu;qfDr ds fy, dq'ky f[kykfM+;ksa ds fy, izek k&i=

izekf kr fd;k tkrk gS fd Jh@Jherh@dqekjh----------------------- vkRet@iRuh@vkRetk

Jh -------------------------------------------- fuokl ¼iwjk uke½ ----------------------------------------- fo'ofo|ky; dh d{kk -------------------

ds fo|kFkhZ us fnukad ----------------------- ls fnukad --------------------- rd----------- ¼LFkku dk uke½ esa vk;ksftr

vUrfoZ'ofo|ky;  ----------------------------  ¼ØhM+k@[ksy&dwn  dk  uke½  izfr;ksfxrk@VwukZesUV  esa  ----------------------------

- fo'ofo|ky; dh vksj ls Hkkx fy;kA muds Vhe ds }kjk mDr izfr;ksfxrk@VwukZesUV esa -------------------------

LFkku izkIr fd;k x;kA ;g izek k&i= Mhu vkWQ LiksV~lZ vFkok bapktZ [ksy dwn -------------------------------------

fo'ofo|ky; esa miyC/k fjdkMZ ds vk/kkj ij fn;k x;k gSA

LFkku --------------------------                                            gLrk{kj  ---------------------------------------

fnuakd -----------------------                                             uke      ----------------------------------------------

in -----------------------------------------------

laLFkk dk  uke ----------------------------

eqgj ---------------------------------------------

uksV % ;g izek k&i= fo'ofo|ky; ds Mhu vkWQ LiksV~lZ ;k bapktZ [ksy&dwn }kjk O;fDrxr :i ls fd;s x;s gLrk{kj gksus ij gh ekU; gksxkA

izk:i  & 4

¼ekU;rk izkIr ØhM+k@[ksy esa vius Ldwy dh vksj ls jk"Vªh; [ksy&dwn esa Hkkx ysus okys f[kykM+h ds fy;s½

MkbjsDVªsV vkWQ ifCyd bUlVªD'kUl@funs'kd] f'k{kk] mÙkj izns'k ------------------------------ jkT; Lrj dh lsokvksa@inksa ij fu;qfDr ds fy, dq'ky f[kykfM+;ksa ds fy, izek k&i=

izekf kr fd;k tkrk gS fd Jh@Jherh@dqekjh----------------------- vkRet@iRuh@vkRetk

Jh -------------------------------------------- fuokl ¼iwjk uke½ ------------------------------------------- esa---------------- Ldwy esa d{kk

---------------------------- ds fo|kFkhZ us fnukad ----------------------- ls fnukad --------------------- rd----------- ¼LFkku dk

uke½ esa vk;ksftr Ldwyksa ds us'kuy xsEl dh ---------------------------------- ¼ØhM+k@[ksy&dwn dk uke½

izfr;ksfxrk@VwukZesUV esa ------------------------------------ Ldwy dh vksj ls Hkkx fy;kA muds Vhe ds }kjk mDr

izfr;ksfxrk@VwukZesUV esa------------- LFkku izkIr fd;k x;kA

;g izek k&i= MkbjsDVªsV vkWQ ifCyd bUlVªD'kUl@f'k{kk esa miyC/k fjdkMZ ds vk/kkj ij fn;k x;k gSA

LFkku --------------------------                                            gLrk{kj   -------------------------------------

fnuakd -----------------------                                             uke --------------------------------------------

in ----------------------------------------------

laLFkk dk  uke ---------------------------

eqgj --------------------------------------------

uksV % ;g izek k&i= funs'kd@;k vfrfjDr@la;qDr ;k mifuns'kd MkbjsDVªsV vkWQ ifCyd bUlVªD'kUl@f'k{kk-------------- }kjk O;fDrxr :i ls gLrk{kj gksus ij ekU; gksxkA

ifjf'k"V&4

ijh{kk  ;kstuk  ,oa ikB~;Øe

lfEefyr jkT; vfHk;U= k lsok ijh{kk gsrq oLrqfu"B izdkj ds fuEuor nks iz'u&i= gksaxs%&

izFke  iz'u i=

fo"k; iz'uksa dh la[;k vad dqy vad le; flooring, roofing and construction features. Retrofitting of buildings, Principle of planning of building for residents and specific uses, National Building code provisions and uses. Basic principles of detailed and approximate estimating, specifications, rate analysis, principles of valuation of real property. Machinery for earthwork, concreting and their specific uses, factors affecting selection of construction equipments, operating cost of equipments. Construction activity, schedules, organizations, quality assurance principles. Basic principle of network CPM and PERT uses in construction monitoring, cost optimization and resource allocation. Basic principles of economic analysis and methods. Project profitability: Basis principles of financial planning, simple toll fixation criterions.

PART – D

GEO TECHNICAL ENGINEERING AND FOUNDATION ENGINEERING

1&lkekU; fgUnh 25 ¼izR;sd iz'u 3 vad½ 75  

375

 

2-30 ¼<kbZ½ ?k Vk

2&eq[; fo"k; ¼ flfoy  bath0&I] eSds0

bath0&I] fo|qr bath0&I] d`f"k bath0&I½

100 ¼izR;sd iz'u 3 vad½ 300
f}rh;  iz'u i=
fo"k; iz'uksa dh la[;k vad dqy vad le;
1&lkekU; v/;;u 25 ¼izR;sd iz'u 3 vad½ 75  

375

 

2-30 ¼<kbZ½ ?k Vk

2&eq[; fo"k; ¼ flfoy  bath0&II] eSds0

bath0&II] fo|qr bath0&II] d`f"k bath0&II½

100 ¼izR;sd iz'u 3 vad½ 300
O;fDrRo ijh{kk ¼lk{kkRdkj½ & 100 vad

dqy ;ksx                                &  375 + 375 + 100 = 850 vad ikB~;Øe

lkekU; fgUnh& fgUnh dk ikB~;Øe bl izdkj cuk;k tk;sxk rkfd mEehnokj dh fgUnh Hkk"kk dh le> vkSj 'kCnksa ds dq'ky iz;ksx dh tk¡p gks ldsA bldk Lrj gkbZ Ldwy dk gksxkA

lkekU; v/;;u% lkekU; v/;;u ds iz'u&i= lelkef;d ?kVukvksa vkSj ,slh ckrksa dh muds oSKkfud igyqvksa ij /;ku nsrs gq, tkudkjh lfEefyr gksxh tks izfrfnu ds vuqHko esa vkrh gS rFkk ftudh fdlh f'kf{kr O;fDr ls vis{kk dh tk ldrh gSA iz'u&i= esa Hkkjr dk bfrgkl] jktuhfr vkSj Hkwxksy ds ,sls

Types of soils, phase relationships, consistency limits particles size distribution, classifications of soils, structure and clay mineralogy. Capillary water, effective stress and pore water pressure, Darcy's Law, factors affecting permeability, determination of permeability, permeability of stratified soil deposits. Seepage pressure, quick sand condition, compressibility and consolidation, Terzaghi's theory of one dimensional consolidation, consolidation test.

Compaction of soil, field control of compaction total stress and effective stress parameters, pore pressure parameters, shear strength of soils, Mohr Coulomb failure theory, shear tests.

Earth pressure at rest, active and passive pressures, Rankin's theory Coulomb's wedge

continued..

 

UTTAR PRADESH PUBLIC SERVICE COMMISSION                                                                                                                                (7)
theory, Graphical method of earth pressure on retaining wall, sheetpile walls, braced excavation, bearing capacity, Terzaghi and other important theories, net and gross bearing pressure.

Immediate and consolidation settlement, stability of slope, total stress and effective stress methods, conventional methods of slices, stability number.

Subsurface exploration, methods of boring, sampling, penetration tests, pressure  meter tests, essential features of foundation, types of foundation, design criteria, choice of type of foundation, stress distribution in soils, Boussinessq's theory, Westergaard method, Newmarks chart, pressure bulb, contact, pressure, applicability of different bearing capacity theories, evaluation of bearing capacity from filed tests, allowable bearing capacity, settlement analysis, allowable settlement, proportioning of footing, isolated and combined footings, rafts, pile foundation, types of piles, plies capacity, static and dynamic analysis, design of pile groups, pile load test, settlement of piles lateral loads, foundation for bridges, Ground improvement techniques: sand drains, stone columns, grouting, soil stabilization geotextiles and geomembrane, Machine foundation: Natural frequency, design of machine foundations based on the recommendation of B.I.S. codes.

CIVIL ENGINEERING PAPER- II

Part – A

FLUID MECHANICS, OPEN CHANNEL FLOW, HYDRAULIC MACHINES AND HYDROPOWER ENGINEERING.

Fluid Mechanics: Fluid properties and their roles in fluid motion, fluid statics including forces acting on plane and curved surfaces, Kinematics and Dynamics of Fluid flow: Velocity and acceleration, stream lines, equation of continuity, irrotational and rotational flow, velocity potential and stream functions, flownet, methods of drawing flownet, source and sink, flow separation, free and forced vorties.

Flow control volume equation, continuity, momentum and energy equations, Navier- Strokes equation, Euler's equation of motion and application to fluid flow problems, pipe flow, plane, curved, stationary and moving vanes sluice gates, weirs, orifice meters and Venturi meters.

Dimensional Analysis and Similitude: Buckingham's Pi-theorem, dimensionless parameters, similitude theory, model laws, undistorted and distorted models.

Laminar Flow: Laminar flow between parallel, stationary and moving plates, flow through pipes.

Boundary Layer: Laminar and turbulent boundary layer on a flat plate, laminar sub-layer, smooth and rough boundaries, submerged flow, drag and lift and its applications.

Turbulent flow through pipes: Characteristics of turbulent flow, velocity distribution, pipe friction factor, hydraulic grade line and total energy line, siphons, expansion and contractions in pipes pipe networks, water hammer in pipes and surge tanks.

Open Channel Flow: Flow types, uniform and nonuniform flows, momentum and energy correction factors, Specific energy and specific force, critical depth, resistance equations and roughness coefficient, rapidly varied flow, flow in transitions, Brink flow, Hydraulic jump and its applications, waves and surges, gradually varied flow, classification of surface profiles, control section, Integration of varied flow equation and their solution.

HYDRAULIC MACHINES AND HYDROPOWER:

Centrifugal pumps-Types, characteristics, Net Positive Suction-head (NPSH), specific speed, Pumps in series and parallel.

Reciprocating pumps, Air vessels, Hydraulic ram, efficiency parameters, Rotary and positive displacement pumps, diaphragm and jet pumps.

Hydraulic turbines: types, classification, Choice of turbines, performance parameters, controls, characteristics, specific speed.

Principles of hydropower development: Types, layouts and component works, surge tanks, 'types and choice, Flow duration curves and dependable flow, Storage and pondage, Pumped storage plants, Special types of hydel plants.

Part – B

Hydrology and Water Resources Engineering

Hydrology: Hydrologic cycle, precipitation, evaporation, transpiration, infiltration, overland flow, hydrographs, flood frequency analysis, flood routing through a reservoir, channel flow routing- Muskingam method.

Ground Water flow: Specific yield, storage coefficient, coefficient of permeability, confined and unconfined aquifers, radial flow into a well under confined and unconfined conditions, Open wells and tube wells.

Ground and surface water recourses single and multipurpose projects, storage capacity of reservoirs, reservoir losses, reservoir sedimentation.

Water requirements of crops consumptive use, duty and delta, irrigation methods, Irrigation efficiencies.

Canals: Distribution systems for cannal irrigation, canal capacity, canal losses, alignment of main and distributory canals, Design of cannal by kennedy's and Lacey's thoeorie, Water logging and its prevention.

Diversion head works: Compenents, Principles and design of weirs on permeable and impermeable foundations, Khosla's theory, Bligh's creep theory Storage works.

Cross drainage works.

Types of dams, design principles of gravity and earth dams, stability analysis. Spillways: Spillway types energy dissipation.

River training: Objectives of river training, methods of river training and bank protection.

Part – C Transportation Engineering

Highway Engineering: Principles of Highway alignments, classification and geometric design, elements and standards for roads.

Pavement: flexible and rigid pavements Design principles and methodology. Construction methods and materials for stabilized soil. WBM, Bituminous works and Cement Concrete roads.

Surface and sub-surface drainage arrangements for roads, culvert structures. Pavement distresses and strengthening by overlays.

Traffic surveys and their application in traffic planning, Typical design features for channelized, intersection, rotary etc., signal designs, standard traffic signs and markings. Railway Engineering: Permanent way, ballast, sleeper, chair and faslenings, points, crossings, different types of turn outs, cross-over, setting out of points, Maintenance of track, super elevation, creep of rails ruling gradients, track resistance tractive effort, curve resistance, Station yards and station buildings, platform sidings, turn outs, Signals and interlocking, level crossings.

Air port Engineering: Layouts, Planning and design.

Part – D Environmental Engineering

Water supply: Estimation of water demand, impurities in water and their significance, physical, chemical and bacteriological parameters and their analysis, waterborne diseases, standards for potable water.

Water collection & treatment: Intake structures, principles and design of sedimentation tank, coagulation cum flocculation units slow sand filter, rapid sand filter and pressure filter, theory & practices of chlorination, water softening, removal of taste and salinity, Sewerage Systems, Domestic and industrial wastes, storm, sewage, separate and combined systems, flow through sewers, design of sewers.

Waste water characterization: Solids, Dissolved oxygen (DO), BOD COD, TOC, and Nitrogen, Standards for disposal of effluent in normal water course and on to land.

Waste water treatment: Principles and design of wastewater Treatment units--, Screening, grit chamber, sedimentation tank activated sludge process, trickling filters, oxidation ditches, oxidation ponds, septic tank; Treatment and disposal of sludge; recycling of waste water.

Solid waste management: Classification, Collection and disposal of solid waste in rural and urban areas, Principles of solid waste management.

Environmental pollution: Air and water pollution and their control acts. Radioactive waste and their disposal Environmental impact assessment of Thermal power Plants, mines and river valley projects, Sustainable development.

Part – E

Survey and Engineering Geology

(a) Surveying: Common methods and instruments for distance and angle measurements in Civil Engineering works, their use in plane table traverse survey, levelling, triangulation, contouring and topographical maps. Survey layouts for culverts canal, bridge, roads,  railway alignment and buildings.

Basic principles of photogrammetry and remote sensing. Introduction to Geographical information system.

Engineering Geology

Basic concepts of Engineering geology and its applications in projects such as dams, bridges and tunnels.

MECHANICAL ENGINEERING PAPER-I

1.        Engineering Mechanics:

Analysis of force systems, friction, cendtroid and centre of gravity, trusses and beams, principle of virtual work, kinematics and kinetics of particle, kinematics and kinetics of rigid bodies.

2.        Mechanism and Machines:

Velocity and acceleration of links, cams and followers gears and gear trains clutches, belt drives, brakes and dynamometers, Flywheel and governors, balancing of rotating and reciprocating masses, balancing of multi cylinder engines, Free and forced vibration, damped vibration, whirling of shafts.

3.        Mechanics of Solids:

Stresses and strains, compound stresses strains, Torsion of circular shafts, stresses and deflections in beams unsymmetrical bending, curved beams, Thin and thick cylinders and spheres, Buckling of columns, Energy methods, helical and leaf springs.

4.        Design of Machine Elements:

Design for Static and dynamic loading, Theories of failure, fatigue principles of design of rivetted, welded and bolted joints, shafts, springs, bearings, brakes, clutches and flywheels.

5.        Engineering Materials:

Crystal systems and crystallography, crystal imperfections, Alloys and phase diagrams, Heat treatment, ferrous and non ferrous metals and alloys, Mechanical properties and testing.

6.        Manufacturing:

Metal casting, metal forming, metal joining, Mechanics of metal cutting, machining and machine tool operations, unconventional machining methods limits, fits and tolerances, inspection: Surface roughness, comparators, computer integrated manufacturing, Flexible manufacturing systems, jigs and fixtures

7.        Industrial Engineering:

Production, planning and control, inventory control and operation, research, CPM and PERT.

8.        Mechatronics and Robotics:

Microprocessors and microcontrollers, Architecture, Programming, Computer interfacing Programmable logic controller, sensors and actuators, Piezoelectric accelerometers, Hall effect sensors, optical encoder, resolver, Inductosyn, Pneumatic and Hydraulic Actuators, stepper motor, control system, mathematical modeling, control signals, controllability and observability, Robotics: Robot classification, robot specification. Notation: Direct and inverse kinematics homogeneous co-ordinates and arm equation of four axix SCARA Robot.

MECHANICAL ENGINEERING PAPER-II

1.        Thermodynamics:

Thermodynamic systems and processes, properties of pure substances, concepts and applications of zeroth, first and second law of thermodynamics, entropy, availability and irreversibility, detailed analysis of thermodynamic cycles, ideal and real gases, fuels and combustion.

2.        Fluid Mechanics:

Basic concepts and properties of fluids, manometry, fluid statics, buoyancy, equations of motion, Bernoulli's equation and applications, viscous flow of incompressible fluids, laminar and turbulent flows, flow through pipes and head losses in pipes, dimensional analysis, Forces on immersed bodies and boundary layer over a flat plate, isentropic and adiabatic flows, normal shock waves.

3.        Heat Transfer:

Modes of heat transfer, steady and unsteady heat conduction, thermocouple time constant, critical thickness of insulation, heat transfer from fins, momentum and energy equations for boundary layer flow on a flat plate. Free and forced convection, radiation heat transfer, Stefan-Boltzmann law, shape factor, black and grey body radiation heat exchange, boiling and condensation, heat exchanger analysis, LMTD and NTU – effectiveness methods.

continued..

 

UTTAR PRADESH PUBLIC SERVICE COMMISSION                                                                                                                                (8)
4.        Energy conversion:

SI and CI engines, performance characteristics and testing of IC engines, combustion phenomena in SI and CI engines, carburetion and fuel injection systems, emissions and emission control. Reciprocating and rotary pumps, pelton wheel, Francis and Kaplan turbines, velocity diagrams impulse and reaction principles steam and gas turbines; Rankine and Brayton cycles with regeneration and reheat, high pressure boilers, draft, condensers. Unconventional power systems, including nuclear, MHD, biomass, wind and tidal systems, utilization of solar energy; Reciprocating and rotary compressors; theory and applications, Theory of propulsions, pulsejet and ramjet engines.

5.        Environmental control:

Vapour compression, vapour absorption, steam jet and air refrigeration systems, properties of refrigerant and their nomenclature, psychometrics properties and processes, psychrometic relations, use of pschrometic chart, load estimation, supply air conditions, sensible heat factors, air conditioning system layout, comfort chart, comfort and industrial air conditioning.

ELECTRTICAL ENGINEERING PAPER – I

Networks and Systems: Steady-state and Transient-state Analysis of systems, Thevenin's-, Norton's-, Superposition- and Maximum Power Transfer-theorems, Driving point Transfer functions, Two-port networks, Laplace and Fourier transforms and their applications in Network analysis, Z-transforms for discrete systems, R-L, R-C & L-C network synthesis.

E.M. Theory: Analysis of electrostatic and magnetostatic fields, Laplace, Poission and Maxwell equations, solution of boundary value problems, electromagnetic wave propagation, ground and space waves, Propagation between Earth Station and Satellites. Control systems: Mathematical modelling of dynamic linear continuous systems, Block diagrams and Signal flow graphs, time-response specifications, steady-state error, Routh- Hurwitz criterion, Nyquist techniques, Root Loci, Bode Plots, Polar Plot, and stability analysis, Lag-, Lead-, Lag-Lead-compensation, state-space modelling, state transition matrix, controllability and observability.

Elements of Electronics: Basics of semiconductor diodes, BJT, FET and their chracteristics, different types of transistors and FET amplifiers equivalent circuits and frequency response, feedback oscillators, colpitts oscillator and Hartley Oscillator, Operational amplifiers-chracteristics and applications.

Power System Analysis and Design: Line parameters and calculations, Performance of Transmission lines, Mechanical design of overhead lines and Insulators, Corona and radio interference Parameters of single- and three-core Cables, Bus admittance matrix, Load flow equations and methods of solutions, Fast-decoupled load flow, Balance- and Unbalanced-faults analysis, Power system stability, Power system transients and travailing Waves, EHV Transmission, HVDC transmission, Concepts of FACTS, Voltage Control and Economic operation, Concepts of distributed generation, solar and wind power, smart grid concepts.

Elements of Electrial Machines:- General concepts of E.m.f., m.m.f., and torque in rotating machines, DC Machines: motor and generator characteristics, equivalent circuits, commutation and amature reaction, starting and speed controls of motors; Synchronous Machines: performance, regulation, Parallel operation of generators, motor starting, characteristics and applications, Transformers: phasor-diagram and equivalent circuit, efficiency, and voltage regulation, auto-transformers, 3-phase transformers.

Measurement: Basic methods of measurement, Precision and standards, error analysis, Bridges and Poteniometers; moving coil, Moving iron, dynamometer and induction type instruments, measurement of voltage, current, power, energy, and power factor, Instrument transformers, digital voltmeters and multimeters, phase-, time- and frequency- measurement, Q-meters Oscilloscopes, Basics of sensors, and data acquisition system, Instrumentation systems for pressure and temperature measurements.

ELECTRICAL ENGINEERING PAPER – II

Power Electronics and Drives: Semiconductor, power, diodes, transistors, thyristors, triacs, GTOs, MOSFETs and IGBTs static characteristics and principles of operation, triggering circuits single phase and threephase controlled rectifiers-fully controlled and half controlled, smoothing and filters regulated power supplies, DC-DC choppers and inverters, speed control circuits for DC and A.C. drives, Basics of electric drives: types, quadrant operation, reversing and braking of electric motors, estimation of power ratings, traction motors.

Digital Electronics: Boolean algebra, logic gates, combinational and sequencial logic circuits, multiplexers, muiltivibrators, sample and hold circuits, A/D and D/A converters, basics of filter circuits and applications, active filters, semiconductor memories.

Microwaves and Communication systems: Electromagnetic wave in guided media, wave guide components, resonators, microwave tubes, microwave generators and amplifiers.

Analog Communication basics: modulation and demodulation, noise and bandwidth, transmitters and receivers, signal to noise ratio, digital communication basics, sampling, quantizing, coding frequency- and time-domain multiplexing, sound and vision broadcast, antennas, transmission lines at audio and ultra-high frequencies.

Induction and special Machines: Three-phase Induction motors Rotating magnetic field, Torque-slip characterstics, Equivalent Circuit and determination of its parameters, starters, speed control, Induction generators. Single phase Induction motors: Theory and phasor diagrams, characteristics, starting and applications, repulsion motor, series motor:

E.m.f. equation and phasor diagram and performance, servomotors, stepper motors, reluctance motors, brushless DC motors (BLDC).

Power system protection and Switch gear: Methods of Arc Extinction, Restriking voltages and recovery voltage, testing of circuit breakers, Protective relays, protective schemes for power system equipment, surges in transmission lines and protection.

Numerical Methods: Solution of non liner algebraic equations, single and multisteps

methods for solution of differential equations.

Electrical Engineering Materials: Crystal structure and defects, conducting, insulating and magneting Materials, super-conductors.

Elements of Microprocessors : Data representation and representation of integer and floating point-numbers. Organization and programming of a microprocessor, ROM and RAM memories CPU of a microcomputer, interfacing memory and I/O devices, Programmable peripheral and communication interface. Application of microprocessors.

AGRICULTURAL ENGINEERING PAPER-I

(a) Thermodynamics and Heat Engines: Concept of energy, temperature and heat equations; laws of thermodynamics, pure substances and their properties; entropy, Rankine, air standard Otto, Diesel and Joule cycles; indicator diagrams.

(b)   Farm Power: Sources and status of power in India; farm power and agricultural productivity relationship; construction and operational features of IC engines, various system of IC engine namely carburetion, ignition, cooling, lubrication; valves and valve timing, special features of diesel engines, tractors and their classification, power transimission, repair and maintenance; tractor testing, and tractor economics; power tillers – their economics and suitability, Energy in Agriculture.

(c)  Farm Machinery: Design, construction, operation, repair and maintenance of tillage tools, implements and equipment viz. mould board and disk plough; harrows, cultivators, rotary tiller, seeding and planting machines, hoe, weeders, sprayers and dusters; harvester, threshers and combines; soil and crop factors influencing machine performance and energy requirements; selection of farm machines, economics of agricultural mechanization. Earth moving machineries.

(d) Heat and Mass Transfer: Thermal properties of materials; steady state and transient heat conduction, natural and forced convection; boiling, condensation, thermal radiation exchange, Heat exchangers, heat and mass transfer analogy; Fick's laws of diffusion, psychrometrics; analysis of heat and mass transfer processes, instrument and measurement systems.

(e)    Process and Food Engineering : Unit operations in post harvest processing (cleaning, grading, drying, size reduction, evaporation, pasteurization, distillation etc.); processing of cereals, pulses, oilseeds, fruits & vegetables, animal feed, spices, dairy products, meat etc.; design of processing equipment and systems, milking machines.

(f)  Storage and handling: Changes in stored products during storage; storage of food grains and their products, perishables (vegetable, fruits, dairy product, meat and eggs) storage system- air tight ventilated, refrigerated, modified atmospheric and controlled atmospheric storages; packaging; conveyors; design and management of storage and handling systems. Reducing losses in storages and handling.

AGRICULTURAL ENGINEERING PAPER-II

(a)  Hydraulics and Fluid Mechanics: Fluid properties, units and dimensions: surface tension and capillarity, equation of continuity, Bernoulli equation, Laminar and turbulent flow, steady and unsteady flow, Flow of fluids in pipes and open channels, design of open channels for non erosive and non silting velocities, most economical cross section, measurement of irrigation water and other water measuring devices viz. weirs, notches, orifices and flumes.

(b)  Surveying and Leveling: Linear measurements; survey methods and devices used; principle of leveling, simple, differential and profile leveling; Contouring and characteristics of contour lines; Land leveling and grading, earth work estimation.

(c)  Soil and Water Conservation Engineering: Forms of precipitation; hydrologic cycle; Point rainfall analysis, frequency analysis, agricultural watershed and its management; water management in agri-horti-aquaculture system, mechanics of water and wind erosion; Rational method of prediction of peak runoff and its limitations; concept of unit hydrograph and instantaneous hydrograph; factors affecting erosion and runoff; water erosion control measures – contour cultivation, strip cropping, terracing, afforestation, pastures; Design of gully control structures – temporary and permanent; stream bank erosion; flood routing; flood amelioration by upstream soil water management; wind erosion control measures and sand dunes stabilization.

(d)   Irrigation Pumps: Design, construction, performance characteristics, selection, installation, servicing and maintenance of different pumps (reciprocating, centrifugal, gear, turbine, submersible, propeller, jet); Hydraulic ram; Renewable and non-renewable power sources for pumping solar pumps.

(e)  Irrigation and Drainage Engineering: Water wealth and irrigation in India; Soil water plant relationship; Forms and occurrence of soil water; methods and devices for soil moisture measurement; water requirement of crops; irrigation scheduling; irrigation methods – their hydraulics and design flood, border, furrow, sprinkler and drip irrigation, concept of irrigation efficiencies; water conveyance and control; Design of canals. Lacey and Kennedy's theories.

Drainage needs and its benefits; Darcy's Law, hydraulic conductivity; drainage coefficient; drainage methods, surface drainage (drainage of flat and sloping lands); design of open ditches their alignment and construction; designs and layout of subsurface drains; depth and spacing of drains and drainage outlets; installation of drains and drainage wells; drainage of salt affected areas.

(f)  Ground Water Hydrology and Tube well Engineering: Occurrence and movement of ground water, steady and transient flow into wells, well interference, well drilling, design of well assembly and gravel pack, installation of well screen, completion and development of wells.

(g) Rural Engineering: Building materials and their properties; Farm stead planning, and design of dairy barns; poultry, goat-sheep, and piggery housing; selection of site, planning and design of rural houses, farm roads, village drainage; waste disposal and sanitary structures; cost estimates, green house construction.

Secretary

Share it
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •